Page 15 - APE Catalog
P. 15

MACHINING SERVICES
APE o ers a  rst-class production facility. This includes a state-of-the-art machine shop for modifying existing engine parts such as: Boring
and honing cylinders, boring engine cases, head surfacing, block surfacing, valve jobs, lightening and balancing crankshafts. We also operate a complete aerospace-type CNC machining facility in which we manufacture our world-famous racing products. These facilities are all on-site at the APE race shop.
If you’re sending engine components to APE for machine work, please visit www.aperaceparts.com/packaging for detailed shipping instructions.
Note that below there are part numbers corresponding to machine work performed “with piston purchase.” These special-priced part numbers require that the pistons be purchased at the time the work is done. For pricing visit www.aperaceparts.com/machining
CYLINDER BORING - IRON SLEEVE
FOUR CYLINDER WITH REMOVABLE BLOCKS
LC100
BORE AND HONE WITH PISTON PURCHASE
LC150
BORE AND HONE WITH CUSTOMER'S PISTONS
FOUR CYLINDER ONE-PIECE BLOCK AND UPPER CASES
LC200
LC200P
BORE AND HONE WITH PISTON PURCHASE
BORE AND HONE WITH CUSTOMER'S PISTONS
TWINS/ONE BLOCK
LC175
BORE AND HONE WITH PISTON PURCHASE
LC176
SINGLES
BORE AND HONE WITH CUSTOMER'S PISTONS
LC180
BORE AND HONE WITH PISTON PURCHASE
LC181
LC201D
BORE AND HONE WITH CUSTOMER'S PISTONS
DEGLAZE CYLINDER
FOURS
LC250
BORE BLOCK, INSTALL SLEEVES, SURFACE, AIR-COOLED 4 CYLINDER
LC250W
BORE BLOCK, INSTALL SLEEVES, SURFACE, LIQUID-COOLED 4 CYLINDER
LC350
LC275
SURFACE BLOCK OR CYLINDER HEAD
REMOVED UNDAMAGED SLEEVE / REPLACE
LC275-D
REMOVE DAMAGED SLEEVE / REPLACE
LC300
MACHINE O-RING GROOVES (WIRE PROVIDED)
LC350B
SURFACE BOTTOM OF CYLINDER WHEN CHANGING SLEEVES
PISTONS, VALVES, MISC. MACHINING PISTONS
LC225 PIN-FIT ONE (1) PISTON
LC235 PIN-FIT FOUR (4) PISTONS W/PISTON PURCHASE & BORE AND HONE LC500 GAS-PORT ONE (1) PISTON WITH PISTON PURCHASE
LC550 GAS-PORT ONE (1) CUSTOMER'S PISTON
LC400
MACHINE ONE (1) PISTON'S VALVE POCKETS WITH PISTON PUR-
CHASE.
LC450 MACHINE ONE (1) PISTON'S VALVE POCKET'S IN CUSTOMER'S PISTON LC600 BORE PIN HOLE FOR LARGER PIN
VALVES
LC410 MACHINE VALVE-HEAD DIAMETER AND GRIND FACE
LC415 MACHINE VALVE STEM TO LENGTH AND CUT KEEPER GROOVE
LC420 LC410 AND LC415 ADD $10.00 EA. IF CUSTOMER SUPPLIES VALVES.
LC416 GRIND ONE (1) VALVE FACE
LC417 GRIND ONE (1) VALVE STEM TIP
MISC.
LC125 RE-BUSH CARRILLO ROD
LC650 INSTALL ONE HELICOIL
LC700 BORE ENGINE CASE FOR LARGER SLEEVES, NO STUDS. LC725 REMOVE STUDS FROM TOP CASE
LC765 INSTALL APE SPROCKET ADAPTER ON CAM
LC765-NC INSTALL APE ADAPTER ON CAMS WITH CAM AND SPROCKET
CYLINDER BORING - ALUMINUM NIKASIL PLATED
REMOVABLE BLOCKS
LC145
BORE AND RE-NIKASIL SINGLE CYLINDER - W/PISTON PURCHASE
LC146
BORE AND RE-NIKASIL SINGLE CYLINDER - W/CUSTOMER PISTON
LC155
BORE AND REPLATE FOUR CYLINDER WITH PISTON PURCHASE
LC156
BORE AND REPLATE FOUR CYLINDER WITH CUSTOMER'S PISTONS
ONE PIECE BLOCK AND UPPER CASE
LC157
LC158
BORE AND REPLATE FOUR CYLINDER WITH PISTON PURCHASE
BORE AND REPLATE FOUR CYLINDER WITH CUSTOMER'S PISTONS
LC770
PURCHASE.
ASSEMBLE RODS ON CRANK WITH ROD PURCHASE (BEARINGS EXTRA)
CYLINDER HEAD SERVICES (See page 18 for CYLINDER HEADS) PART#
LC770CR ASSEMBLE CUSTOMER SUPPLIED RODS ON CRANK (BEARINGS EXTRA)
LC775 SHOT PEEN CUSTOMER'S RODS - SET OF 1-4 LC785 REMOVE ROLLER BEARING
LC800 WELD FOUR CYLINDER ROLLER BEARING CRANKS LC850 LABOR PER HOUR
LC110 RECONDITION CARRILLO ROD
LC-HT HEAT TREAT PROCESS
LC910 CUT APE WRIST PINS TO CUSTOM LENGTH
DESCRIPTION
HW-3-4S HW-3-8S HW-3-16S HW-3-20S HW-4-4 HW-4-8 HW-4-16 HW-4-20 HW-5-P HW-5-4 HW-5-8 HW-5-16 HW-5-20 HW-6 HW-7 HW-7SP HW-10
HW-20-8
HW-20-16
HW-40 HW-45 HW-48 LC-415 LC-420 LC425 LC-350
INSTALL BRONZE VALVE GUIDES - LABOR ONLY - SINGLE CYLINDER HEAD**
INSTALL BRONZE VALVE GUIDES AND SIZE FOR VALVES - LABOR ONLY - 8 VALVE HEAD
INSTALL BRONZE VALVE GUIDES AND SIZE FOR VALVES- LABOR ONLY - 16 VALVE HEAD
INSTALL BRONZE VALVE GUIDES AND SIZE FOR VALVES - LABOR ONLY - 20 VALVE HEAD
PERFORMANCE (STD SIZE) VALVE JOB - SINGLE CYLINDER HEAD**
PERFORMANCE (STD SIZE) VALVE JOB - 8 VALVE HEAD
PERFORMANCE (STD SIZE) VALVE JOB - 16 VALVE HEAD
PERFORMANCE (STD SIZE) VALVE JOB - 20 VALVE HEAD
BIG VALVE INSTALLATION WITH PORTING (SEE PORTED HEADS BELOW)
INSTALL OVERSIZE VALVES AND BLEND PORTS, EACH SIDE - SINGLE CYLINDER HEAD**
INSTALL OVERSIZE VALVES, EACH SIDE, 8 VALVE. (BLEND TO PORTS ADD $49.00)
INSTALL OVERSIZE VALVES, EACH SIDE, 16VALVE, (BLEND TO PORTS ADD $69.00)
INSTALL OVERSIZE VALVES, EACH SIDE, 20 VALVE. (BLEND TO PORTS ADD $75.00)
CAM CLEARANCE KAWASAKI HEAD
ASSEMBLE HEAD (SEALS EXTRA) INCLUDED IN VALVE JOB
ADJUSTING SPRING HEIGHTS WHEN ASSEMBLING HEAD
INSTALL IDLER ADAPTER IN GPZ HEAD
8-VALVE HEAD. DISASSEMBLE, INSPECT, CLEAN COMBUSTION CHAMBERS AND VALVES, LAP VALVES IN. REASSEMBLE. NO PARTS INCLUDED. SEALS EXTRA.
16-VALVE HEAD. DISASSEMBLE, INSPECT, CLEAN COMBUSTION CHAMBERS AND VALVES, LAP VALVES IN. REASSEMBLE. NO PARTS INCLUDED. SEALS EXTRA.
PORT AND VALVE JOB 8-VALVE
PORT AND VALVE JOB 16-VALVE
INSTALL 16 APE BRONZE SEATS IN FOUR CYLINDER HEAD.
MACHINE ONE VALVE STEM
MACHINE ONE VALVE HEAD AND STEM
GRIND ONE VALVE FACE
SURFACE CYLINDER HEAD
**NOTE: HW-3-4S, HW-4-4 AND HW-5-4 ARE FOR SINGLE CYLINDER ENGINES.
(661)256-7309 www.aperaceparts.com
15


































































































   13   14   15   16   17