Page 17 - APE Catalog
P. 17

SUZUKI CYLINDER STUDS
MAIN BEARING STUDS
APPLICATION
PART NUMBER
DRZ400
CSDRZ400 (NUTS INCLUDED)
SV650
CS650S (USE CHN10125-8 NUTS)
GSXR750 (2004-2005)
CS1000GSX (USE CHN10125-10 NUTS)
GS1000
CS1000S
GSXR1000 (2001-2015)
CS1000GSX (USE CHN10125-10 NUTS)
GS1100
CS1100S (CHN1000K NUTS)
GSXR1100 (1127CC CASE)
CS1127GSX
GS1150
CS1150S (CHN1000K NUTS)
BANDIT 1200
CS1127GSX
HAYABUSA
CS1300STN (USE CHN10125-10 NUTS)
Heat treated chrome
moly main bearing
studs (case studs) are
necessary to prevent
the cases from moving
around under power in
high output engines.
These high strength
studs help to prevent
crankshaft damage.
Made from the same
special chrome moly
that we use in our
cylinder studs. All threads are rolled after heat treat for maximum strength.
All sets come with special  anged nuts.
SUZUKI MAIN BEARING STUDS
KAWASAKI MAIN BEARING STUDS
*The 10 mm main bearing holes in the lower case are slightly miss matched from the factory. It is necessary to run a 10 mm reamer (not a drill) thru the holes from the inside out. Visit www.zxzone.com/studs to see instructions.
PERSONAL WATERCRAFT CYLINDER STUDS
APE PART# CS1200K FIT THE FOLLOWING WATERCRAFT (12 POINT NUTS INCLUDED)
STUD WASHERS FOR HAYABUSA
We o er two types of washers to be used with our Hayabusa cylinder studs.
On the gen 2 busa, 2008 and later, the head bolt washers do not come o  the bolts. When using our stud kits with a gen 2, it is necessary or order part #BHW1300. This is a set of 10. On gen 1 busas, use
your stock head bolt washers.
BHW1300 Set of 10
Part# BHW-STP This special washer is for use
on heads that have been machined for our 1/2”
studs, but then the head goes back on a motor with 10mm studs. Stock washers do not work well on heads that have had this mod.
BHW-SPT Set of 10
YAMAHA CYLINDER STUDS
KAWASAKI CYLINDER STUDS
HONDA CYLINDER STUDS
BMW CYLINDER STUDS
CYLINDER HEAD NUTS
Super heat treated cylinder head nuts are a must for high output engines. Help prevent blown and leaking head gaskets caused by the threads in the soft stock nuts stretching. APE nuts are machined from alloy steel and fully heat treated for maximum strength. Packed in complete engine sets.
APPLICATION
PART NUMBER
GSXR1000
MBS1000GSX
GSXR1100 (THRU 1992)
MBS1100GSX
GS1100/EARLY 1150
MBS1100S
LATE 1150 W 8 AND 9MM BOLTS
MBS1150S
APPLICATION
PART NUMBER
USE HEAD NUT #
FJ100 (LATE)/1200
CS1100FJ
CHN10125-12
APPLICATION
PART NUMBER
Z1900, KZ1000, GPZ1100
MBS1000K
ZX10 (2004 - 2015)
MBSZX10
APPLICATION
PART NUMBER
650/750 2 VALVE FOURS
CS650K (USE CHN1000K NUTS)
900/1000/1100 2 VALVE FOURS
CS900K (USE CHN1000K NUTS)
ZX10 (2004 AND LATER)
CSZX10 (USE STOCK WASHERS, CHN10125-10 NUTS)
ZX11, ZRX11
CS1100K (USE CHN1100K NUTS)
ZRX12, ZZR1200
CS1100K (USE CHN1100K NUTS)
ZX12
CS1200K (NUTS INCLUDED)
APPLICATION
YEARS
STX-12F
STX-15F
2003-2007
APPLICATION
PART NUMBER
CB400F
CS400H
CB500/550/650 FOURS
CS500H
750 SOHC THRU 1978
CS750H
900/1100F
CS900H
CBX 1978-1981
CS-CBX-E78
CBX 1982
CS-CBX-L82
ULTRA LX
2004-2013
STX
2007-2013
2009-2010
ULTRA250
ULTRA260
2007-2008
ULTRA300
2009-2010
2011-2013
APPLICATION
PART NUMBER
USE HEAD NUT #
1000RR
CSBMW1000
NUTS INCLUDED
PART#
DESCRIPTION
CHN1000K
10MM X 1.25 WITH 7/8” BASE DIA.
KAWASAKI 900/1000/1100
SUZUKI GS1100/1150
GSXR750/1100 OIL COOOLED MODELS - SET OF 12
CHN1100K
SPECIAL HEAD NUTS FOR USE WITH APE #CS1100K STUD SET
CHN10125-8
SV650
CHN10125-10
10MM X 1.25 WITH 3/4” BASE DIA. FOR USE WITH ANY APPLI- CATION REQUIRING THE SMALLER 3/4” BASE DIA. SET OF 10.
(661)256-7309 www.aperaceparts.com
17


































































































   15   16   17   18   19