Page 27 - APE Catalog
P. 27

VALVE LASH SHIM KITS
APE o ers valve lash shim kits for the two most popular sizes. The kits contain all of the shims in the ranges listed below. Three shims of each size. Save big money by doing your own valve service. Replacement shims are also available.
Shim kits are not returnable.
REPLACEMENT (REFILL) 7.5MM O.D. SHIMS FOR KIT #VSHK75-01
7.5MM O.D. VALVE LASH SHIM KIT
Sizes include three each; 1.20 thru 3.50 mm by .05 mm increments - 47 sizes - 141 shims.
Kit #VSHK75-01
9.5MM O.D. VALVE LASH SHIM KIT
Sizes include three each; 1.20 thru 3.50 mm by .05 mm increments - 47 sizes - 141 shims.
Kit #VSHK95-02
For a complete listing of all sportbike and o road models that use these shims
visit www.aperaceparts.com/valveshims
REPLACEMENT (REFILL) 7.5MM O.D. SHIMS FOR KIT #VSHK95-02
HARDWELD ROCKER ARMS
The cam contact surface on all screw adjuster type Suzuki rocker arms is a soft material covered with hard chrome. Under the increased loads of higher spring pressures, cam lifts, etc. the surface caves in allowing the chrome to crack and peel o . This wipes out the rocker and cam lobe. The solution is welding the contact pads with special hard face rod and regrinding the faces. This service is performed on customer supplied rockers. Note that they can have pad damage. Remove the adjuster screws. WE DO NOT RETURN ANY ADJUSTER SCREWS.
#WRA1100 (sold individually)
#WRA1100GS-STD (standard pad, sold individually) #WRA1100GS-EXT (extended pad, sold individually)
KAWASAKI GPZ CAM CHAIN IDLER ADAPTER
This adapter allows the use of a GPZ1100
or 1000J model cylinder head on the earlier KZ900 / 1000 lower end. It maintains the roller style cam chain. This is the only modi-  cation necessary to install the late big valve head on the early motor. Use with oem KZ sprocket or the high performance version at the right. Comes with mounting bolts (not shown.)
NOTE: HW-10 requires customer’s head and cam cover.
See page 72 for Idler Adapter Drill Jig for DIY installation.
PART NUMBER
SIZE RANGE (.05MM INCREMENTS)
O.D.
SHIM03
1.20 THRU 1.45
7.5 MM
SHIM04
1.50 THRU 1.75
7.5 MM
SHIM05
1.80 THRU 2.05
7.5 MM
SHIM06
2.10 THRU 2.35
7.5 MM
SHIM15
2.40 THRU 2.65
7.5 MM
SHIM16
2.70 THRU 2.95
7.5 MM
SHIM17
3.00 THRU 3.25
7.5 MM
SHIM18
3.30 THRU 3.50
7.5 MM
PART NUMBER
SIZE RANGE (.05MM INCREMENTS)
O.D.
SHIM07
1.20 THRU 1.45
9.5 MM
SHIM08
1.50 THRU 1.75
9.5 MM
SHIM09
1.80 THRU 2.05
9.5 MM
SHIM10
2.10 THRU 2.35
9.5 MM
SHIM11
2.40 THRU 2.65
9.5 MM
SHIM12
2.70 THRU 2.95
9.5 MM
SHIM13
3.00 THRU 3.25
9.5 MM
SHIM14
3.30 THRU 3.50
9.5 MM
ALUMINUM CAM COVER PLUGS
APE fully machined billet aluminum cam cover plugs for the Kawasaki. Won’t blow out or suck in as the stock rubber plugs do on this model. Fits all Z1, KZ900, and 1000s except
J Model.
#99278-S SET OF 4 SILVER #99278 B SET OF 4 BLACK
CCIA
ADAPTER W PIN
CCIA-WG
INCLUDES IDLER GEAR
HW-10
INSTALL IN CUSTOMER’S HEAD
(661)256-7309 www.aperaceparts.com
27


































































































   25   26   27   28   29