Page 47 - APE Catalog
P. 47

GSXR1000 LOW PROFILE BEATHER COVER
APE o ers billet low pro le breather covers for the GSXR1000. Uses OEM gasket. Comes with 4 mounting bolts and special breather hose  tting.
#BC1000GSX
BILLET REED CHAMBER BLOCK OFF PLATES
Available in three styles:
• Single outlet (shown - like the
oem unit) #BC1300
• Dual outlet (for some very large
motors that may need more
breathing capacity) #BC1300-2
• No outlet for motors using
vacuum pumps. #BC1300-0 Uses OEM gasket. Mounting bolts
included
These reed chamber covers replace the ugly stock caps. They are fully cnc-machined from billet 6061 aluminum. Bolt holes are recessed so bolt heads are  ush with the top of the cap. The kits come with both caps and four bright mounting bolts. Uses stock reed-valve assembly for sealing - no gasket necessary.
HAYABUSA LOW PROFILE BEATHER COVER
SUZUKI HAYABUSA (2008-2014)
PVB1300-08
SUZUKI GSXR600 (2001-2003)
PVBGX1000
SUZUKI GSXR750 (2000-2005)
PVBGX1000
GSXR1000 (2001-2008)
PVBGX1000
KAWASAKI ZX10
PVBZX10
KAWASAKI ZX12
PVBZX12
KAWASAKI KZ/GPZ CAM COVER CAPS
Owners of “race only” Kawasakis using the popular “J model”
or GPZ1100 cylinder head can now remove the smog hose caps without leaving those ugly holes in the valve cover. The APE BILLET caps are CNCed for perfect  t and stunning good looks. They  t all 1000s and 1100s with smog hoses in the cam cover. All kits come with mounting bolts. Set of two.
KAW KZ LOW PROFILE BREATHER COVER
• Allows plenty of room for large carbs, turbochargers, etc.
• CNC machined from billet stock
• Uses factory o-ring
• #KBC1000K for applications where
motor is vented from starter hole
• #KBC1000D (shown) drilled/tapped
for  tting and breather  lter
• Fits KZ900/1000 thru 1978
SUZUKI PAIR VALVE BLOCK OFF PLATES
APE pair valve block-o  plates allow for the removal of the Pair valve system which can save up to 2 1/2 lbs on race only engines. These plates  t all Hayabusa models thru ‘07 and most GSXRs with 30 mm stud centers.
Does not  t 2005 1000s and Bandit 1200s. They come a set of four with gaskets.
#PVB1300GX
BILLET ALTERNATOR BLOCK OFF COVER
APE Alternator block o  covers allow the removal of the alternator
on race only bikes. Their unique design makes them a simple bolt on replacement for the alternator, which can be re-installed if desired. All APE billet covers come complete with o-ring and mounting bolts. This model has the top mounting ear eliminated as most racers remove the top  ange from the cases to facilitate the installation of larger carburetors.
#ABPS1100 GSXR1100
KZ650 (1977-1980)
KCK650
KZ750 LTD (1980-1981)
KC650
KZ.GPZ550
KCK550
GPZ1100, KZ1000 (SMOG) , 1000J
KCK1100
(661)256-7309 www.aperaceparts.com
47


































































































   45   46   47   48   49