Page 50 - APE Catalog
P. 50

C
RANKSHAFTS
www.racecranks.com
GSXR1000 BILLET STROKER CRANK KITS
APE o ers the ultimate GSXR1000 stroker kit. Includes new Billet stroker crankshaft, and Carrillo stroker rods. Crankshaft is race balanced to less than 1/3 gram.
BSK1000-4 4 MM Billet stroker kit
BSK1000-6 6 MM Billet stroker kit ( Stroker pistons required. )
WELDED STROKER KITS
Includes welded stroker on customer supplied core, balancer gear removed, “draglite” machin- ing, and race balanced to less than 1/3 gram and Carrillo stroker rods. Customer core required.
WSK1000-4 4 MM Welded stroker kit
WSK1000-6 6 MM Welded stroker kit ( Stroker pistons required. )
GSXR1000 BILLET STROKER CRANKS (CRANK ONLY)
SBSC1000-4 4mm stroker crank SBSC1000-6 6mm stroker crank
GSXR1000 STROKER CRANKS
All APE strokers are fully nitrided for extra long bearing journal life. All cranks have standard rod journal sizes making bearing selection a snap. We can stroke any stroke that  ts your engine program, however the most popular are
4MM This size requires Carrillo stroker rods. This size when used with a 1070 piston kit makes the very popular 1143cc motor.
6MM Requires Carrillo stroker rods and custom pistons. This size when used with a 1070 piston kit makes the very popular 1179cc motor.
KAWASAKI ZX STROKER CRANKS
4mm - 4mm stroker can be used with a 2mm stroker plate (for stroker plates see page 52).
4.6mm - 4.6mm stroker can be used with a 2.3 mm stroker plate (for stroker plates see page 52)
APE PRO STREET CONNECTING RODS
1969-1978 HONDA 750 SOHC
Developed for the hot rod street bikes that make enough power that the risk of using stock rods is too great, but don’t make all out race power that required Carrillo H beams.
Good running 836’s with a cam have been known to put stock rods right thru the cases. APE has the is economical solution.
Fully machined from heat treated 4340 billet steel. Precision sizing for use with OEM bearings. Complete with ARP 2000 performance rod bolts.
PSRH750 set of four
ULTIMATE 2MM STROKER CRANK KIT FOR HAYABUSA
Kit includes Gen 2 busa crankshaft , fully lightened, counterbalancer gear removed, new billet race rods installed, new Suzuki bearings, and spacer plate. Bolt in your ‘99 thru 07. Ready for the most demanding applications.
BCK1300 Ultimate crank kit with Carrillo H-Beam rods
2MM STROKER CRANK KIT FOR HAYABUSA
Kit consists of a Gen 2 Hayabusa crankshaft, but you can’t buy this one from Suzuki or anyone else. Rod journals are  uted for extra oil at the rod bearings. Micro polished. Computer balanced to less than 1/3 gram. (these cranks don’t come from Suzuki balanced that well) This allows you to run this crank with the counterbalancer removed if you like. Includes certi cate of balance. Spacer plate, allows this crank to bolt into earlier busas without changing rods or pistons. (Use 08 main bearings) When used with a 1397 motor, it yields 1441cc.
#HCK-08
HONDA CB750 ULTRA CRANK
APE o ers the exclusive Honda Ultra-crank assembly for the sohc CB750.
Includes Customer supplied
crankshaft, lightened and
race balanced, Exclusive APE
Pro Street billet rods installed
with new oem bearings.
Ready to install This Ultra Crank kit is only available from APE
ULCKH750
(661)256-7309 www.aperaceparts.com
50


































































































   48   49   50   51   52