Page 67 - APE Catalog
P. 67

TRE
BilletProof Racing is proud to introduce the GPS PRO for the Suzuki GSXR line. The all
new GPS PRO is a Plug-N-Play gear position controller which acts as a Smart TRE...it will disable the top speed limiter, enable full timing in all gears, and will transmit neutral to the ECU to allow the newer bikes to idle correctly. The GPS PRO also has an optically isolated output to the ECU in order to protect the ECU
from any unwanted interference or a short in the main harness. It comes complete with factory waterproof connectors for an easy installation, just unplug the factory sensor and plug in the GPS PRO inline and you are done! Keep in mind, if your bike is equipped with a gear position indicator from the factory, it will now read 5-0-5-5- 5-5-5, instead of 1-0-2-3-4-5-6.
This part is intended for race use only, and comes with a full lifetime warranty against materials and workmanship. That’s right, LIFETIME...you won’t  nd a better deal on an aftermarket electronics part anywhere!
The GPS PRO  ts all GSXR models from 2001-present and all years Hayabusa. One model  ts all. #GPS1
MSD LAUNCHMASTER
The MSD Launchmaster is starting line RPM control for GSXR1000, GSXR750 (2000 and later) and 1300 Hayabusa. The Launchmaster comes with a plug and play harness that plugs into the coils. No splicing of coil wires is required. The Launchmaster sets from 1800 RPM to 9900 RPM in 100 RPM increments. The Launchmaster can be activated by a positive 12vdc signal or a ground signal.
For GSXR1000 and GSXR750, 2000 and later. 1300 Hayabusa.
#2-4350
DYNA SHIFT MINDER SHIFT LIGHT
The Dyna shift light features a machined billet aluminum housing and is designed to withstand the vibration on a motorcycle. It is the most popular among racers. The RPM is set using the Dyna Shift Minder control box included in the system.The Dyna Shift Minder control module has been designed with extremely accurate circuitry to insure triggering accuracy to better than ± 1/2%. The Shift Minder control module is adjustable to switch at any of 64 di erent rpm settings with 125 rpm increments between settings. The Shift Minder is self contained and requires no additional parts for shift point selection. Shift Minder Systems listed below include shift light and shift Minder.
PART#
APPLICATION
DSL-1
SHIFT LITE
DSL-2
SHIFT LITE, MINI (BLACK, SILVER, RED, GREEN, BLUE)
DSM-2
SHIFT MINDER 2 CYL
DSM-2H
SHIFT MINDER 4 CYL
DSM-2HD-EFI
SHIFT MINDER 2 CYL H-D EFI MODELS 2007-2012
DSM-4
SHIFT MINDER 4 CYL
DSM-4H
SHIFT MINDER 4 CYL
DSMS-2
SHIFT MINDER SYS 2 CYL
DSMS-2H
SHIFT MINDER SYS 4 CYL
DSMS-2HD-EFI
SHIFT MINDER SYS 2 CYL H-D EFI MODELS 2007-2012
DSMS-4
SHIFT MINDER SYS 4 CYL
DSMS-4H
SHIFT MINDER SYS 4 CYL
SUZUKI HAYABUSA (2002-2007) #4227 SUZUKI GSXR (2003-2009) #42271 KAWASAKI ZX14 (2006-2008) #4219
DSL-2 DYNA SHIFT LIGHT
The DSL-2 is a small, lightweight LED based shift light for use with the Dyna Shift Minder or any aftermarket RPM switch. Available in a variety of colors to match your color scheme.
MSD SB6 PROGRAMMABLE IGNITION
Melt the pavement as you streak o  the line with MSD’s new SB6 programmable ignition installed on your Kawasaki ZX14 or Hayabusa.
Once plugged into the factory harness, you can select from 10 preprogrammed timing curves, or plug your PC to the USB port and start mapping. You can program timing maps, rev limits, shift points and much more with the easy-to-use Pro-Data+ software.
• Programmable timed launch limiter
• Alter the timing curve to match riding conditions
• Record and review rpm and timing functions
• Custom  t harness with sealed connectors
• Advance or retard the factory timing: adjust timing +5°/-20°
• Load up to 10 timing curves
• Shift light: Set up to 5 shift point from 2000 rpm to 12500 rpm • Shift light intensity: set intensity of light from 1% to 100%
• Shift Kill: set kill time from 20ms to 99ms
• Shift kill delay: set kill delay from 1ms to 50ms
• View real-time engine parameters
• Time controlled launch rev limiter
• Programmable retard for nitrous hits
• Plug-n-play installation
• Sensor input for TPS, MAP or O2, 0-5 volts
• On-board ignition data acquisition
• USB for PC connections
(661)256-7309 www.aperaceparts.com
67


































































































   65   66   67   68   69