Page 70 - APE Catalog
P. 70

M
ANIFOLDS / STARTER PLATES
VELOCITY STACKS
RUBBER MANIFOLDS
Fits all Mikuni RS series and other carbs with 55mm O.D. intake bells.
Set of four - silver.
#005-250
30MM LNGTH. BROAD HIGH RPM POWER
#005-251
50MM LNGTH. MID RPM POWER
BILLET NITROUS OXIDE PLATE
HONDA CB750 (1969-1970) #05-897
HONDA CB750 (1971-1978) #05-898
KAWASAKI Z1900/KZ1000/GPZ1100
#KM4811
APE o ers a billet nitrous fogger plate for the KZ / GPZ model Kawasakis. They mount to the head and feature separate tapped holes for mounting the large manifolds. They are tapped for NOS / Nitrous Express fogger nozzles ( not included. )
#KNP1000 KZ1000 #KNP1100 100J/GPZ1100
ALUMINUM NOS MANIFOLDS
Precision CNC machined billet nitrous manifolds install between the rubber carb boots and the cylinder head. Manifolds are tapped for NOS fogger nozzles. Using APE billet manifolds make installing your NOS kit a snap.
Certain models feature o-ring sealing to the cylinder head. (GSXR 1100 shown) Works with any brand nozzle that has 1/16 npt thread..
Comes in set of four. Fogger nozzles not includeed.
SUZUKI LEFT SIDE MOTOR PLATE - GS1100/1150
Countershaft support bearing is incorporated along with the crank support bearing now in one package. Features an O-ring and seal behind the crank bearing for complete no leak operation. Completely CNC machined for perfect  t.
Available for large or small Suzuki crank ends. The countershaft bearing accepts o set sprockets with a 45 mm nose ( also available from APE) This motor plate comes with: billet cnc plate, starter nut, support pla. te, mounting bolts, seal, seal holders, all bearings and bearing holders, pressed-assembled and ready to install.
#MPS1100 Small style 25mm seal diameter #MPS1150 Large style 29mm seal diameter
STARTER PLATES
APE is racing’s leading manufacturer of outboard starter plates and nuts.
APE plates are precision CNC machined to exact tolerances. This assures that the seal is directly on the crankshaft center line, which allows long service without leaks or premature seal wear. The seal holder has a built in o-ring between it and the plate so that it will never leak oil. Besides the precision  t and function, APE starter plates are strikingly good looking. Bright satin  nish with highlighted edges for showbike quality.
All APE kits come fully assembled, ready to install. Kits come complete with cnc machined heat treated steel starter nut. Standard 1 1/8 inch hex.
OUTBOARD BEARING STYLE
This plate carries a bearing on the outside of the plate to give the crank support out on the very end. This prevents the crank snout oscillation that fatigues and eventually causes the destruction of the left side throw, causing catastrophic engine failure.
#SPS1100-B SMALL CRANK TAPER 25MM SEAL DIA. #SPS1150-B LARGE CRANK TAPER 29MM SEAL DIA.
PART#
APPLICATION
NOSMS1100
SUZUKI GSXR1100/GSXR750 OIL COOLED*
NOSMK1000
KAWASAKI 900-1100
*DOES NOT FIT ‘88-’89 SLINGSHOT 750
SUZUKI HAYABUSA
SPS1300GX
SUZUKI GSXR1000 (EARLY)
SPS1000GX
SUZUKI GS1100 (25MM SEAL DIA.)
SPS1100
SUZUKI GS1150 (29MM SEAL DIA.)
SPS1150
KAW Z1, KZ1000, GPZ1100 (22MM SEAL DIA.)
SPK900
KAW Z1, KZ1000, GPZ1100 (25MM SEAL DIA.)
SPK1000
(661)256-7309 www.aperaceparts.com
70


































































































   68   69   70   71   72