Page 73 - APE Catalog
P. 73

www.racetoolz.com
BILLET ENGINE VALVE TRAY
• CNC machined from billet aluminum and chrome moly
• Holds 16 valves up to 34mm head diameter and 106mm length
• Perfect for organizing valves when head is being worked on
STUD INSTALLATION TOOL
CYLINDER STUD PULLER
All you need is a 1/2” ratchet and extension. This device tightens its grip on the the shaft of the stud as you unscrew it. Works on all studs from 1/4” (6.5mm) to 3/4” (19mm).
#SP-100
#VTM16
TDC10
10MM TDC TOOL
TDC12
12MM TDC TOOL
TDC14
14MM TDC TOOL
08-150
8MMX1.25
08-151
10MMX1.25
HEAD SAVER KIT
This tool makes it easy to install cylinder and main bearing studs. No more double-nutting. The set screw/ steel ball mechanism locks
the tool at the top of the stud. Easy to put on and remove.
The Racetoolz head saver kit is designed to repair damaged valve guide holes
in Kawasaki KZ650 through GPZ1100 2 valve cylinder heads. Damage can occur when old
guides are driven out with carbon on them, valves run into
each other, breaking and moving the guide, cracking the guide boss which
TOP DEAD CENTER TOOLS
The only accurate way to  nd top dead center. CNC machined billet aluminum.
Note: NGK plugs starting with “C” are 10mm. Starting with “D” are 12mm If you use another brand, you will have to remove the plug and measure it .
VALVE GUIDE HONES
APE o ers precision valve guide hones for  tting valves in tight valve guides. No more hand reaming tight guides. After installing APE or other eftermarket bronze guides, you may  nd a tight one. No problem..just a few strokes through the guide with the hone in a drill motor and
the valve slips right in. Not recommended for new stock OEM steel guides.
requires welding. The head saver kit will ream a new oversize hole on center of the tappet
bore. Then install one of the special guides that come in the kit, and it is  xed. Touch up the seat and it is back in
service. The reamer opens the hole .025” which should be more than enough to clean up the most severely damaged guide hole. Every shop that works on KZ cylinder heads should have this kit. Each kit includes one head-saver bushing, one reamer, set screw (to easily lift the bushing from the tappet bore) and two +.027 oversize bronze valve guides. #HS1000K
Replacement oversize valve guides - #99101-25 APE SHOP CLOCK
The Team APE shop clock is perfect for the garage, workshop, race rig or in the pits. Runs on 1 AA battery (included) so no electrical outlet is needed. Hangs almost anywhere. 10” Dia.
CYLINDER HEAD STAND
APPLICATION
SIZE
PART#WWW
--
4MM
GH-400
--
4.5MM
GH-450
SUZ GSXRS ETC.
5MM
GH-500
SUZ GS1100/1150 ETC.
5.5MM
GH-550
KAW 2 VALVE ETC.
7MM
GH-700
HARLEY DAVIDSON®
5/16"
GH-312
HARLEY DAVIDSON®
3/8"
GH-375
#WC10
These neat stands will  rmly hold cylinder heads for all kinds of service operations. Great for porting, seat grinding, assembly, bench-shimming etc. Flip the head over in seconds. No bolting or unbolting of the head required.
#PT110
(661)256-7309 www.aperaceparts.com
73


































































































   71   72   73   74   75