HOME USED PARTS TOUR TECH AND SPECS CONTACT US

CSAKS1300 SPROCKET INSTALLATION INSTRUCTIONS

INSTALLING APE ADJUSTABLE CAM SPROCKETS ON SUZUKI HAYABUSA, GSXR750 2000 & later, GSXR1000 CAMS 1/03 update

EXHAUST
The camshaft has a single factory line on the sprocket end. The APE sprocket adaptor is to be installed so that this line goes in center of the two lines on the adaptor. Install the sprocket so that the single sprocket dot is in line with the two adaptor lines.

INTAKE
The camshaft has a single factory line on the sprocket end. Install the APE adaptor is to be installed so that the line on the cam lines up with the single line on the adaptor. Install the sprocket so that the single sprocket dot is 180 degrees from the two lines on the adaptor.

HAYABUSA ONLY... Using intake cams on the exhaust side of the motor is a popular mod in the busa. When doing this type of installation, the single dot on the APE adaptor should be inline with the line on the intake cam.

We recommend red loctite be used on the adapters to cam surfaces.
BE CAREFUL when removing stock sprockets and installing adapters. Support the cam securely or damage can result. Do not remove the bearings unless they need replacement.